Velocity Edge M40 Spezifikationen PDF herunterladen (Seite 114)

TM 05539-IN

SKIM GLASSING - CONTINUED 0026 00

0026 00-2

PREPARATION FOR BARREL AND RECEIVER

NOTE

Curing and drying time, including ambient temperature requirements, should be according to manu-

factures’s recommendations.

1. Insert modeling clay inside following cavities on the bottom and side of the receiver (5), gas port hole (4), right side trig-

ger pin holes (6), and trigger guard screw holes (7). Trim clay with a putty knife flush with the receiver. Clean receiver

with acetone.

2. Tape the barrel (10) with 2-in. masking tape (1) (3 wraps) and 1.5-in. masking tape (3) on the front of the recoil lug (2)

and apply a 1/8 in. clay bevel to each side of the recoil lug.

3. Tape the bottom and sides of the recoil lug (2), wrapping twice with masking tape (1). Trim the overhang of masking

tape. The masking tape should come to 3/8-in. (8) on both sides of the recoil lug.

M40-066

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 171 172

Keine Kommentare

Velocity Edge M40 Spezifikationen Seite 114