Velocity Edge MX230 Bedienungsanleitung PDF herunterladen (Seite 10)

STEP 9

Install a -6-4 straight connector into port marked

“PILOT” and install a -6-6 straight connector into port

“A” of the pilot to shift valve. Install the -6-4, 90

degree elbow with jam nuts into ports “C”. Install the -

6, 90 degree elbow into port “B”. Tighten the jam nut

so that the elbows point up as shown.

Install the transducer into swivel adapter. Connect

swivel adapter to 90 degree elbow and connect

elbow as shown at port “A”. Tighten fittings in

position as shown.

STEP 10

Install the pilot to shift valve assembly onto the

mounting bracket with the 1/4 inch hardware supplied

in kit.

STEP 11

Install a -6, 90 degree elbow at both “T” port and “P”

port. Position the elbows as shown and tighten the

swivel nuts. Install the -4 run tee onto the 90 degree

elbow at “LS” port. Tighten the run tee into the

position shown.

RD04K166

✑✖✓ ✑

1. PORT “PILOT” 5. TRANSDUCER

2. PORT “C” 6. SWIVEL ADAPTER

3. PORT “B” 7. 90 DEGREE ELBOW

4. PORT “A”

RD04K167

RD04K072

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 45 46

Keine Kommentare

Velocity Edge MX230 Bedienungsanleitung Seite 10