Velocity Edge MX230 Bedienungsanleitung PDF herunterladen (Seite 37)

STEP 2

Remove the blank out plug from the third slot in the

control panel. Install the switch provided in the

control panel.

STEP 3

Connect the three spade terminals of the power

harness on the back of the switch.

NOTE: The wires and switch pins are labeled.

STEP 4

Connect the red wire of the accessory plug jumper to

the connector pin attached to the red wire on the

power harness. Connect the black wire to the

connector pin attached to the black wire on the power

harness. Leave the connector (1) inside the console.

STEP 5

Remove the kick panel on the right control console.

Route the accessory plug jumper cable out the base

of the console toward the right rear corner of the cab.

RD04B020

RH04K135

RR04K026

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 45 46

Keine Kommentare

Velocity Edge MX230 Bedienungsanleitung Seite 37