Velocity Edge MX230 Bedienungsanleitung PDF herunterladen (Seite 41)

STEP 3

Connect the jumper harness connectors on the

between the original transmission control lever

connectors. Route the adapter harness down to the

cab floor. Reinstall the left venting duct and the

console cover.

STEP 4

Route the jumper harness from the front console to

the back cab wall through the existing channels and

wire routing.

STEP 5

Connect the transmission control lever adapter

harness to the wheel speed harness. Reinstall the

front floor mat. Route the controller connector toward

the rear of the operator’s seat base to be connected

later.

STEP 6

Route the leads with the speed sensor connector

under the cab toward the left front of the tractor.

Make sure there are no pinch points along the

routing. Tie strap the harness as needed.

RD03J066

RD03J064

RH04K131

RD03G127

1 2 ... 36 37 38 39 40 41 42 43 44 45 46

Keine Kommentare

Velocity Edge MX230 Bedienungsanleitung Seite 41